Info

Fig. 19.1. Operating table 1150.20 with foot plates fitted for both legs

19.2 Extension table thigh

19.2.1 Supine position

O Figs. 19.6-19.8. Indications

Medullary nailing, intramedullary reaming. Preparations

4 Two arm positioning devices 4 Extension table accessories

4 Shaving in the area of the incision and preoperative skin cleansing Positioning

4 Universal operating table for traumatology and orthopaedic procedures (extension table)

4 Anaesthetic preparation and induction in supine position with 2 adapted arm positioning devices 4 If necessary, diagonal positioning of the operating table in the theatre 4 When positioning the patient, take appropriate measures to prevent decubitus at areas which are subjected to pressure 4 Longitudinal adjustment of the operating table towards the feet (1150.20) 4 Swivel the extension bars in a V-shape towards the feet on the side being operated

4 Insert the countertraction post on the side being treated 4 Insert the short telescopic bar in the extension bar on the side being operated 4 Fit the screw tension device

4 Fit the rotating and tilting clamp to the screw tension device 4 Place a double wedge cushion on the operating table 4 Fit the arm positioning device to the rails of the lower back plate on the side not being operated 4 Fit the side rail extension to the side rail of the seat plate 4 Fit the Goepel leg holder to the side rail extension with a radial adjusting clamp

4 Fit the anaesthesia screen with a radial adjusting clamp to the side rail of the upper back plate on the left-hand side 4 Fit the anaesthesia screen extensions and possibly suspend 2 arm straps 4 Fit the Kirschner wire bow before transferring the patient 4 Transfer the patient from the induction table to the prepared operating table in supine position 4 Fit the positioned Kirschner wire bow to the traction stirrup clamp with rotation, constantly pulling the leg 4 Position the left leg in the Goepel leg holder

Position the arms 4 Reposition the fracture using the image intensifier 4 To stabilise the patient, possibly support the thorax from the side 4 Check all screwed and clamped connections 4 Apply the neutral electrode and connect to the HF surgery device 4 Arrange self-adhesive covers for preoperative skin disinfection 4 Position the operating lights 4 Patient warming system

Was this article helpful?

0 0

Post a comment